Schmersal Non-Contact Safety Sensors

Walker Industrial: Home > Manufacturers > P - S > Schmersal > Non-Contact Safety Sensors

Schmersal Non-Contact Safety Sensors

BNS-B20 Non-Contact Safety Sensors

The Series BNS-B20 is designed for use as a combination door handle and safety interlock switch for use on light to medium weight hinged and sliding machine guards. Each unit consists of a door handle assembly equipped with two multiple reed switch arrays and coded magnet actuators. In addition, the unit features two latching magnets that attract pole pieces in the sensor unit providing a holding force of approximately 100 Newtons.

More Info ›
BNS16 Non-Contact Safety Sensors

The BZ16 is a non-contact safety interlock switch with an internal dual-channel design. The assembly consists of the switch and a coded actuating key. The switch can be actuated from the front, top, and rear with each version available with 1 NO/1 NC or 2 NC contacts.

More Info ›
BNS250 Non-Contact Safety Sensors

The Series BNS250 coded-magnet sensors are designed for use as a safety interlock switch on movable machine guards/articulating robot arms. Each sensor set consists of a multiple reed switch unit and a coded-magnet actuator.

More Info ›
BNS260 Non-Contact Safety Sensors

The Series BNS260 coded-magnet sensors are designed for use as a safety interlock switch on movable machine guards/articulating robot arms. Each sensor set consists of a multiple reed switch unit and a coded-magnet actuator. The reed switches, wired in series, will only close in the presence of their matched magnetic field array.

More Info ›
BNS30 & BNS300 Non-Contact Safety Sensors

The Series BNS30 and BNS300 coded-magnet sensors are designed for use as a safety interlock switch on movable machine guards/articulating robot arms. Each sensor set consists of a multiple reed switch unit and a coded-magnet actuator.

More Info ›
BNS303 Non-Contact Safety Sensors

The Series BNS303 coded-magnet sensors both switch and magnet assemblies are sealed to IP67 (submersible) standards. Their tamper-resistant design prevents bypassing with a simple magnet or improperly coded magnetic field. In addition, the BNS module features an integral built-in LED display of switch status, and a 1-meter long prewired pigtail.

More Info ›
BNS33 Non-Contact Safety Sensors

The Series BNS33 coded-magnet sensors are designed for use as a safety interlock switch on movable machine guards/articulating robot arms. Each sensor set consists of a multiple reed switch unit and a coded-magnet actuator. The reed switches, wired in series, will only close in the presence of their matched magnetic field array.

More Info ›
BNS333 Non-Contact Safety Sensors

The Series BNS333 features an integral monitoring and control circuit which detects faults in the reed switch array (satisfying EN954, Category 1 without use of an ancillary safety circuit monitoring module). Their tamper-resistant design prevents bypassing with a simple magnet or improperly coded magnetic field. In addition, the BNS module features an optional built-in LED display of switch status.

More Info ›
BNS33S Non-Contact Safety Sensors

The Series BNS33S coded-magnet sensor is designed for use as a safety interlock switch. The reed switches, wired in series, will only close in the presence of their matched magnetic field array. Both switch and magnet assemblies are sealed to IP69K standards. Their tamper-resistant design prevents bypassing with a simple magnet or improperly coded magnetic field.

More Info ›
BNS36 Non-Contact Safety Sensors

The Series BNS36 sensor set consists of a multiple reed switch unit and a coded-magnet actuator. The reed switches, wired in series, will only close in the presence of their matched magnetic field array. Both switch and magnet assemblies are sealed to IP67 (submersible) standards. The BNS module features an optional built-in LED display of switch status, and a 1-meter long prewired pigtail or an available connector.

More Info ›
BNS40S Non-Contact Safety Sensors

The Series BNS40S safety sensor is especially suitable for food-processing machinery and plants. Due to the stainless steel enclosure, the safety sensor is resistant to corrosion and cleaning agents. The safety sensor is suitable for concealed mounting behind non-ferromagnetic covers.

More Info ›
BZ 16 Non-Contact Safety Sensors

The BZ16 is a non-contact safety interlock switch with an internal dual-channel design. The assembly consists of the switch and a coded actuating key. The switch can be actuated from the front, top, and rear with each version available with 1 NO/1 NC or 2 NC contacts.

More Info ›
RSS16 Electronic Safety Sensors

Based off of the AZ16 Series, Schmersal RSS16 Series Electronic Safety Sensors are a safe and economical solution in the field of personal protection of equipment. Their versatile construction is now available as a non-contact system with wear-free RFID technology for the most demanding requirements of safety level and protection against manipulation.

More Info ›
RSS260 RFID Electronic Safety Sensors

Schmersal RSS260 RFID Electronic Safety Sensors are designed for applications in safety circuits and are used for monitoring the position of movable separating safety guards. In addition to their compact design and high protection against tampering, they are unique because of their universal suitability for removable, rotatable and sliding protection equipment.

More Info ›
RSS36

Schmersal RSS36 RFID Safety Sensors come in a thermoplastic enclosure with high repeat accuracy of the switching points. They feature 2 short-circuit proof PNP safety outputs, and an integral cross-short, wire-breakage and external voltage monitoring of the safety cables up to the control cabinet.

More Info ›