SIR1 & SIR2 Series
The SC3/SC4 Series are solid-state 3 or 4 channel, chasers designed for sequential three or four circuit flashing of incandescent lamp loads. Unlike electromechanical chasers, there are no contacts to arc, wear, and eventually fail. Fixed or adjustable rates of 30 to 300 operations per minute.
Operation
Sequential 3 or 4 circuit flashing of incandescent loads with equal time delays for each load. Upon application of input voltage, Load 1 is energized. At the end of the time delay, Load 1 de-energizes and Load 2 energizes. At the end of the time delay, Load 2 de-energizes and Load 3 energizes. This cycle continues until input voltage is removed.
Reset: Removing input voltage resets the unit and cycle.
Features:
- SIR1 - Random switching for inductive loads
- SIR2 - Zero voltage switching for resistive& incandescent loads
- Normally open or normally closed output
- 3 - 20A with up to 200A inrush
- Encapsulated circuitry
- Optically isolated output
- 0.25 in. (6.35 mm) terminals with single hole
mounting
Auxiliary Products:
- Quick connect to screw adaptor: P/N: P1015-18
- Female quick connect:
- P/N: P1015-13 (AWG 10/12)
- P/N: P1015-64 (AWG 14/16)
- P/N: P1015-14 (AWG 18/22)
|
|
