PRLB Series
The PRLB Series is designed for use on non-critical timing applications. It offers low cost, knob adjustable timing control, full 10A relay output, and onboard LED indication. The knob adjustment provides a guaranteed time range of up to 10 minutes in 6 ranges. The onboard LED indicates whether or not the unit is timing (flashing LED) as well as the status of the output.
Operation (Delay-on-Break):
Input voltage must be applied at all times prior to and during timing. Upon closure of the initiate switch, the output contacts transfer and remain transferred if no further action is taken. The LED is on steady. When the initiate switch is opened, the time delay is started. The LED flashes during timing. At the conclusion of the delay, the output contacts revert to their original unenergized position. Applying input voltage with the initiate switch closed will energize the load.
Reset: Reclosing the initiate switch during timing resets the time delay. Loss of input voltage resets the time delay and output.
Features:
- Onboard adjustable time delay relay
- Electronic circuit with electromechanical relay
- Popular AC & DC operating voltages
- Industry standard octal plug-in connection
- Time delays 0.05 - 600s in 6 ranges
- ±2% repeat accuracy
- ±10% factory calibration
- LED indication
- 10A, SPDT output contacts
Auxiliary Products:
- Panel mount kit: P/N: BZ1
- Hold-down clips (sold in pairs): P/N: PSC8 (NDS-8)
- Octal 8-pin socket: P/N: NDS-8
- DIN rail: P/N: C103PM (Al)
|
|
|
