 |
 |
 |
|
Q3XTBLD-Q8 - Banner Engineering Q3X: Laser Contrast Sensor Range: up to 300mm Euro M12 5-Pin Integral Connector
Banner’s Q3X is a problem-solving, laser contrast sensor that builds
upon and complements existing Banner sensors. The QS18 and QS30 laser
diffuse sensors have been Banner’s go-to, problem-solving products for
many years for challenging part-presence applications. The Q3X expands
the types of applications Banner can solve due to its rugged metal
housing, a threedigit display for easy to read feedback and versatility
in solving challenging part-detection applications with small contrast
differences.
Features
- Solves challenging part-detection applications with small contrast differences
- High-speed part detection as fast as 250 μs, capturing up to 2,000 events per second
- Angled three-digit display is easily viewed from multiple vantage points
- Display provides clear user feedback for easy setup, and bright output indicator provides high visibility of sensor operation
- Intuitive setup utilizing two tactile buttons located below the display
- Rugged, nickel-plated zinc, laser-marked housing suitable for use
even in environments where cutting fluids and oils might be present
- Rated to IP67, IP68 and IP69K
- Robust immunity to fluorescent light interference
Applications
- High-speed detection
- Part-detection with small contrast changes
- Any challenging application with small contrast changes
 Download the Q3X Instruction Manual in *.pdf format
Download the Q3X Quick Start Guide in *.pdf format
Download the Q3X Laser Contrast Sensor Sell Sheet in *.pdf format
|
Sensing Beam
|
Visible red Class 2 laser, 655 nm
|
|
Supply Voltage (Vcc)
|
10 to 30 V dc
|
|
Power and Current, exclusive of load
|
Supply Power: < 675 mW
Current consumption::< 28 mA at 24 V dc
|
|
Sensing Range
|
300 mm (11.81 in)
|
|
Output Configuration
|
Bipolar (1 PNP & 1 NPN) output
|
|
Output Rating
|
Off-state Leakage Current: < 10 μA
NPN On-state saturation voltage::< 200 mV at 10 mA and < 1.0 V at 100 mA
PNP On-state saturation voltage::< 1 V at 10 mA and < 2.0 V at 100 mA
|
|
Input Wire
|
Allowable Input Voltage Range: 0 to Vcc
Active Low (internal weak pullup—sinking current)::Low State < 2.0 V at 1 mA max.
|
|
Supply Protection Circuitry
|
Protected against reverse polarity, over-voltage, and transient
voltages
|
|
Repeatability
|
60 μs
|
|
Beam Spot Size
|
Distance: 30 mm, Size (x, y) 2.24 mm, 0.79 mm
Distance: 150 mm, Size (x, y) 1.52 mm, 0.55 mm
Distance: 300 mm, Size (x, y) 0.55 mm, 0.27 mm
|
|
Response Speed
|
User selectable: 250 microsceonds, 1 millisecond, 5 milliseconds
|
|
Delay at Power Up
|
1 s
|
|
Ambient Light Immunity
|
> 5000 lux
|
|
Maximum Torque
|
Side mounting: 1 N·m (9 in·lbs)
Nose mounting::10 N·m (88 in·lbs)
|
|
Connector
|
5-pin Euro M12 Integral Connector
|
|
Construction
|
Housing: Nickel-plated zinc die-cast
Side cover: Nickel-plated aluminum
Lens cover: Scratch-resistant PMMA acrylic
Lightpipes and display window: Polysulfone
Adjustment buttons: 316 stainless steel
|
|
Vibration
|
MIL-STD-202G, Method 201A (10 to 60 Hz, 0.06
in (1.52 mm) double amplitude, 2 hours each along X, Y and Z axes), with
sensor operating
|
|
Shock
|
MIL-STD-202G, Method 213B, Condition I (100G 6x along X, Y and Z axes, 18 total shocks), with sensor operating
|
|
Environmental Rating
|
IP67 per IEC60529
IP68 per IEC60529
IP69K per DIN40050-9
|
|
Operating Conditions
|
Temperature: −10 °C to +55 °C (+14 °F to +131 °F)
Humidity:35% to 95% relative humidity
|
|
Storage Temperature
|
–25 °C to +75 °C (−13 °F to +167 °F)
|
|
Certifications
|
CE approved, UL pending
|
|
|
|
 |
|
 |
|