|
The N-Tron100-POE4 Industrial PoE Mid-Span Injector is designed to transmit power along with data over an Ethernet network. It is ideal for powering PoE capable devices where running an AC power feed is either not possible or cost effective. PoE allows an end user to power a PoE camera, wireless access point, or any other PoE capable device without the need for running separate wires for power. This also allows the ability for a centralized battery backup for all these devices
Industrial Mid-Span Power Injector:
Designed to Transmit Power, along with data over an Ethernet Network
Ideal for PoE Cameras, Wireless Access Point, or other PoE Devices
Four 10/100BaseTX RJ-45 Ports (Data In)
Four 10/100BaseTX RJ-45 iPoE Ports (Data & Power Out)
Extended Environmental Specifications
-40ºC to 85º Operating Temperature
>2M Hours MTBF
Compact, Space Saving Package
IEEE 802.3af Compliance
Unmanaged Operation
Automatic Detection of Connected PoE Devices
Up to 0.8 Gb/s Maximum Throughput
Full Wire Speed Communications
Supports 15.4 Watts per port (13 Watts at the PD)
Redundant Power Inputs (46-49 VDC)
N-TRON's Power Supply #NTPS-48-2 is Recommended for this Product (2 Amp @ 48VDC, DIN-Rail Mounted)
Power Fault Status LED
LED iPoE Status Indication
Hardened Metal DIN-Rail Enclosure
 Download the 100-POE4 Industrial Midspan Power Injector Data Sheet in *.pdf format
Download the 100-POE4 Industrial Midspan Power Injector Reference Drawing in *.pdf format
|
