| 27XST Explosion-Proof Strobe Light | |
|
|
Overview:
Federal Signal's Model 27XST explosion-proof strobe light produces 80 high-intensity flashes per minute. This warning light operates on 24VDC only.
The 27XST is UL Listed for Class I, Division 1, Groups C and D; Class II, Division 1, Groups E, F and G; Class I, Division 2, Groups A, B; and Class III. The 27XST is CSA Certified and Marine Rated.
The 24VDC 27XST features a voltage in-rush limiting PCB design that provides greater compatability with factory automation control systems and less electrical interference with in-rush sensitive devices. It's diode polarized power circuit also makes it ideal for fire alarm and supression supervised control panels.
The 27XST is Type 4X rated; constructed to IP66. Corrosion resistance is achieved with a powder epoxy finish applied over the copper-free aluminum housing. All exposed hardware is 316 grade stainless steel.
Federal Signal's Model 27XST has an effective candela (ECP) of 850 and a two million peak candela. A pendant mount is supplied and a ceiling mount and 90 degree wall mount are available options. For easy installation, the mounting box is first installed and the fixture is then threaded onto the mounting box, making the electrical connection. Electrical continuity is made when five threads are engaged.
Federal Signal's Model 27XST is specifically designed for explosion- proof atmospheres and/or corrosive environments. Because it is easy to install and requires very low maintenance, it is ideal for use in areas such as oil rigs, mines, refineries, and chemical plants.
Features:
Available in 24VDC
Six lens colors
10,000 hour strobe tube
3/4–inch pendant mount standard; other options available
Dome guard optional
Type 4X, IP66 enclosure
Supervisable power and low in–rush circuit
Marine Rated
CSFM Approved
CSA Certified
UL and cUL Listed
 Download the
27XST Explosion-Proof Strobe Light
Datasheet in PDF format
Download the
27XST Explosion-Proof Strobe Light
Instruction Sheet in PDF format
|
|
|
