|
|
|
DG200 MINIFLEX Digital Set, Reset Timers
|
|
|
|
|
The DG200 series
timer is a microprocessor based, four digit reset timer housed in a 1/8
DIN style enclosure. Four push-button switches on the front of the unit
provide exact setting of the time setpoint. There are four time ranges
from 99.99 seconds to 99 hours and 99 minutes. There are two versions of
this timer series. The DG201 has six basic output operating modes. The
DG203 has the six output modes of the DG201, but it also has a control
input for Delay-On-Release and Single-Shot operation. In the other
modes, the DG200 control input can be used for a time inhibit function
which stops the timing cycle without resetting the unit. Rocker
switches, located on the side of the unit, are used to program the time
ranges and operating modes. The DG200 timer can be mounted in three ways
for use in most any application. The terminal connections for the unit
are 3/16 inch terminals for use with a square base relay socket. This
provides a means of mounting the unit within a panel. The DG200 timer
can also be mounted through the front of the panel using either an
economical fixed bezel kit or a unique plug-in housing which allows easy
removal for programming changes and replacement.
|
|
|
