Home > Manufacturers > A - D > Cooper Bussmann > Fuse Blocks & Holders > Blocks > 100A to 600A Class R, H (K) & J Knifeblade Blocks > 600V Class R & H (K) Knifeblade Fuse Blocks >

HM60400-1CR Cooper Bussmann FUSE HOLDER

HM60400-1CR - Cooper Bussmann
HM60400-1CR
 
Price: $566.15
Returnable: NOT RETURNABLE
Manufacturer SKU: HM60400-1CR
Manufacturer ID: 051712386944


Free Shipping
Availability: Usually Ships in 3 to 5 Days
Part Number: HM60400-1CR
Qty:

Description
 
HM60400-1CR Cooper Bussmann FUSE HOLDER
  • Integral dovetails allow snapping together multiple poles at point-of-use for greater application flexibility
  • Factory assembled two- and three-pole configurations available
  • Up to four mounting holes per pole increase installation flexibility
  • Standard phase barriers between poles for additional safety
  • Design meets UL creep and clearance requirements for Industrial Control Circuits (UL 508 and UL 845)
  • 200 to 600A blocks meet the higher UL creep and clearance requirements for Industrial Power Distribution Standards (UL 98, UL 69, UL 489, UL 891 and UL 869A)
  • Optional IP20 finger-safe covers available on entire knifeblade fuse block product line:
    • High clarity see-through covers allow for inspecting wire terminations or to take thermography measurements without removing cover
    • Probe holes included for easy, safer testing and troubleshooting
    • Built-in lockout/tagout feature improves safety
  • Standard fuse clip reinforcing springs enhance electrical contact

Volts 250V
Fues Amp Range 70A to 600A
SCCR Withstand Rating - Class R 200kA
- Class H(K) 10kA
Poles 1-, 2- and 3-Pole - Dovetail construction permits assembly of poles required by application
Agency Information UL
- Blocks: Listed cULus E14853 - IZLT & IZLT7
- Covers: Listed UL E58836 - JDVS2
CSA
- Blocks: Certified 47235 - 6225-01
- Covers: Certified 47235 - 6225-01
Flammability Ratings - Blocks UL 94V0, self-extinguishing
- Covers UL 94HB, self-extinguishing
Conductors - 100A-200A Blocks, 75C/90C Cu/Al
- 400A-600A Blocks 75C Cu/Al
Operating & Storage Temperature Range Blocks
-40C to 120C
Covers
Non-indicating covers -40C to 120C
Indicating covers -20C to 90C