Banner Engineering Wireless Q45 Sensors
Solve challenging factory applications or add sensing to existing industrial systems. Banner's Wireless Q45 Sensors are the first self-contained wireless standard photoelectric sensor solution designed for your most challenging control and monitoring applications.
- Easily add a single photoelectric sensor in minutes without pulling cables
- Quickly integrate a scalable, wireless sensor network
infrastructure to improve efficiency by monitoring and coordinating
multiple machines and processes
- 2.4 GHz ISM Band radio meets world-wide standards
Download the
Wireless Q45 Sensors brochure for more information about the available models and their accessories.
The following Wireless Q45 Sensor videos are available on YouTube:
Available Models
Each model is powered by two 3.6V AA lithium batteries
integrated into the housing. The available SureCross Wireless Q45 Sensor
models are:
- Polarized Retroreflective
- Diffuse
- Convergent Visible
- Remote Device Interface
- Fiber Optic
SureCross Gateways for the Wireless Q45 Sensor Networks
The following Gateways are designed to work with the Wireless Q45
Sensors. DIP switches allow the user to select one of the defined I/O
mapping configurations to automatically map the Wireless Q45 Sensors to
the Gateway.
SureCross Gateways for the Wireless Q45 Sensor Networks
The following Gateways are designed to work with the Wireless Q45
Sensors. DIP switches allow the user to select one of the defined I/O
mapping configurations to automatically map the Wireless Q45 Sensors to
the Gateway.
|
|
|
-Q and -QC Model, 2.4 GHz
|
-B2Q Board Module, 2.4 GHz
|
Accessories for Wireless Q45 Sensor Networks
The following are some of the accessories available for Wireless Q45 Sensor Networks.
|
Model
|
Description
|
|
MQDMC-406
|
Cordset, 4-pin M12 Euro-style, male, 6 feet
|
|
FIC-M12M4
|
Connector, 4-pin M12 Euro-style, field wireable
|
|
SMB30SC
|
Bracket, swivel, plastic
|
|
SMB30A
|
Bracket, right angle, stainless steel
|
|
BWA-BATT-006
|
Batteries, 3.6V, 2 AA lithium, 2 pack
|
|
BWA-2O5-C
|
Antenna, Omni, 2.4 GHz, 5 dBi, RP-SMA male, 6½ inches
|
|
BWA-2O7-C
|
Antenna, Omni, 2.4 GHz 7 dBi, RP-SMA male, 9¼ inches
|
|
BWC-1MRSFRSB1
|
Antenna Cable, RG58, RP-SMA to RP-SMAF,
Bulkhead, 1M
|
|
BWC-LMRSFRPB
|
Surge Suppressor, bulkhead, RP-SMA
|
|
PSDINM-24-10
|
Power Supply, 24V, 1.0 Amp, DIN Rail
|
|
DIN-35-70
|
DIN Rail, 35mm design, 70mm long
|
|
SMBDX80DIN
|
Din Rail Bracket for standard DX80 housing
|
|
BWA-HW-034
|
DIN Rail Bracket for small -B2Q Gateway Board Module
|
|
BWA-EF14128
|
Enclosure, fiberglass, 14" x 12" x 8"
|
|
BWA-PA1412
|
Back Panel for enclosure
|
|
BENC-4
|
Enclosure for -B2Q Gateway Board Module
|
Application Notes for the Wireless Q45 Sensors
Using Wireless Q45 Sensors to Call for Parts.
Production operators needed a way to easily call the forklift drivers to deliver additional parts or to remove completed assemblies from the work stations. Because the production area is frequently reconfigured when production requirements change, a wired system would require time-consuming rewiring with every reconfiguration.
Monitoring Door Switches Using Wireless Q45 Sensors.
A major supplier of bulk food ingredients has recently been asked by its customer to verify the building is secure at all times. To achieve this, multiple door and window access points throughout the plant need to be constantly monitored.
Increasing Production Efficiency with the Wireless Q45 Sensors.
Using Wireless Q45 Sensors and EZ-LIGHTs, the customer created a notification system. Each production area has one switch box and one tower light connected to the input on a Wireless Q45 Sensor with dry contact inputs. When a manager or technician is needed on the production line, an employee flips a switch.
|
