| Banner Engineering Safety E-Stop & Guard | |
|
|
- Modules monitor up to 10 external devices for contact failure or wiring faults.
- Module goes into lockout mode if it detects a fault.
- Available voltages include 24V dc; 24V ac/dc; 115V ac or 12 to 24V dc; or 230V ac or 12 to 24V ac/dc.
- Modules monitor positive-opening E-stop and interlock switches.
- Models are available with 2 to 4 normally open safety outputs, depending on module.
- Safety outputs are rated 4 or 6 amps, depending on module.
- Non-safety auxiliary outputs are available on most modules.
- Modules are available with an adjustable output delay of 0-20 or 0-200 seconds, depending on module.
- Two modules allow central monitoring and control over a DeviceNet control network.
- Ratings are NEMA 1 and at least IEC IP20.
- Housings are rugged polycarbonate.
- Bright red and green LED indicators show module's operating status.
*DeviceNet is a trademark of Open DeviceNet Vendor Association, Inc.
|
|
|
