Baldor AC Motors

Walker Industrial: Home > Manufacturers > A - D > Baldor > Motors > AC Motors

AC Motors

Premium Efficient Super-E Motors

Baldor Premium Efficient Super-E Motors are designed to conserve energy over extended time periods. These premium efficiency designs are available in both Totally Enclosed Fan Cooled and Open Drip Proof construction.

More Info ›
Single Phase Motors

Baldor Single Phase Motors are used in applications where only single phase power is utilized. These motors are available from 1/12 Hp through 15 Hp in TEFC and ODP designs. Standard foot mounted configurations are available, as well as C-Face foot mounted and C-Face footless.

More Info ›
General Purpose Industrial Motors

Baldor General Purpose Industrial Motors are available in Open Drip-proof and TEFC construction in both single and three phase. Horsepower sizes available from stock range from 1/12 HP through 1500 HP.

More Info ›
Severe Duty Motors

Baldor Severe Duty Motors are available from 1 HP to 700 HP. These products are especially designed for those applications requiring protection of the motors from severe environmental operating conditions.

More Info ›
Large AC Motors

The reach of Baldor’s Large AC Motor product offering is vast. It extends well beyond NEMA frame ratings to as high as 15,000 Hp and as low as 300 RPM. This includes an extensive range of proven cast iron and fabricated steel motors well suited for both General Purpose and Custom applications.

More Info ›
Washdown Duty Motors

Baldor Washdown Duty Motors are available from 1 HP to 20 HP. These products are especially designed for applications where motors receive washdown on a regular basis.

More Info ›
Explosion Proof Motors

Baldor explosion proof motors are ideal for a wide variety of applications where hazardous fumes or dust may be present. Available from stock in 1/4 hp though 300 hp, in NEMA frames 48 through 449T. U.L. and CSA approved.

More Info ›
Pump Motors

Baldor's pump line of motors include single or three phase jet pump motors, square flange motors, close-coupled pump motors, and P-Base vertical solid shaft pump motors. The motors are stocked in totally enclosed fan cooled, open drip proof, and many explosion proof ratings.

More Info ›
Light Industrial/Commercial Motors

Baldor's new Light Industrial / Commercial Motor line offers many ratings designed for applications with low to medium starting torque requirements. The Baldor Light Industrial / Commercial Motor line brings Baldor's reputation for high quality designs to commercial applications with a cost-effective offering.

More Info ›
HVAC Motors

Baldor's line of Heating, Ventilation, and Air Conditioning Motors are designed with dynamically balanced rotors for reduced vibration and quiet operation. The motors range in size from 1/4 HP to 100 HP and include heavy duty industrial designs as well as designs for commercial applications.

More Info ›
Farm Duty Motors

Baldor's farm duty motors are designed for many of the varied applications found on the farm. Designs include motors suitable for aeration fans, auger drives, grain stirring, metering pumps, instant reversing, irrigation tower drives, and crop driers.

More Info ›
Definite Purpose Motors

The Baldor Definite Purpose family of motors captures a host of variety demanded by the marketplace. These motors include TEFC and ODP Two-speed motors, as well as single phase Pressure Washer motors.

More Info ›
Unit Handling Motors

Baldor’s line of Unit handling motors are designed for a wide variety of applications in baggage handling, conveyors, packaging equipment, machine tools, hoists, elevators and door openers

More Info ›
Brake Motors

Baldor's Brake Motors use a mechanical spring set brake with a manual release. Brake motors may be used on machine tools, conveyors, door operators, speed reducers, hoists, or any application requiring quick stops and positive holds.

More Info ›
200 & 575 Volt Motors

Baldors line of 200 & 575 Volt Motors. These 200 volt motors are stocked from 1 Hp to 50 Hp in TEFC, and 1 Hp to 100 Hp in ODP. The 575 volt motors are available in general purpose TEFC and ODP, Washdown, Severe Duty, IEEE-841, Explosion Proof, and Close-Coupled pump designs, in a variety of mounting configurations.

More Info ›
IEC Frame Motors

Baldor’s line of IEC frame motors are available from D63 through D315M, stocked in 50 Hz or 60 Hz. This means that replacement 60 Hz motors are readily available from Baldor to replace metric motors that have failed on imported machinery.

More Info ›
50 Hertz Motors

Baldor's 50 Hertz Motors are used in applications that require NEMA motors which operate on true 50 Hz power. They are designed to be used at rated voltages with tolerance of ± 15% on voltage.

More Info ›
Inverter/Vector Motors & Controls

Baldor's Inverter/Vector motors are equipped with a superior insulation system designed to comply with NEMA MG-1 part 31 for inverter power. The motors available from stock range from 1/3 Hp to 1000 Hp.

More Info ›

AC Motors